-
Geschikt voor tomos modellen:
Quadro
Flexer
Flexer XL
Youngst'R A55 motorblok
Revival A55 motorblok
Filter
- Category
- Geschikt voor tomos modellen
- Merk
- Price
Pakkingen
-
€1.09Foot gasket for all Tomos A35 cylinders. (up to and including 2007) This gasket is situated in between the cylinder and the engine block. Thickness: 0.3 mm. Make sure that the flush ports are similar to the cylinder, because there are two different types. Tip: not sure which one fits? Also order the other model. Learn More -
€1.25Gasket for the original exhaust or the 25 km/h replacement exhaust. Suitable for all Tomos exhausts with a thin corner (small hole). When in doubt it is best to order a gasket with a big hole as well. Learn More -
€1.00Membrane gasket Tomos A35. A-Quality. Tip: Order 2, one for in between the cylinder and the membrane and one for in between the membrane and the manifold. See illustration 2, part number 34 Learn More -
€1.40Foot gasket for all Tomos models built after 2009 carrying large (wide) flush ports. Pay attention: there are 2 types of foot gaskets. When in doubt, always order a foot gasket from before 2009 as well. See illustration 2, part number 19. Learn More -
€1.95Head gasket Tomos A35 for the 50cc (38mm) cylinder. A-Quality. Tip: Fasten the cylinder head steadily and cross-wise. Learn More -
€3.25Gasket set for the Tomos a3 or a35 cylinder with small transfer ports. 50cc / 38mm. Consists of: - Head gasket - Foot gasket - Exhaust gasket Learn More -
€1.00Exhaust gasket for a Tomos, strengthened with a ring. Suitable for fast exhausts. Small hole (exhaust with thin corner) Learn More -
€1.30Inbusbout + afsluitring.
Zie afbeelding, nummer 5+6
Tip: Olie peilen? Zodra je Tomos rechtop staat en er loopt langzaam olie uit het gaatje dan is je niveau goed.
Moet je de Tomos schuin naar rechts houden om er olie uit te laten lopen dan moet er wat ATF olie bijgevuld worden.
Learn More -
€5.90Pakkingset cilinder. Eurokit - Airsal 65cc / 44mm Tomos A35
Learn More -
€8.50Membrane gasket Tomos A35. A-Quality. Tip: Order 2, one for in between the cylinder and the membrane and one for in between the membrane and the manifold. See illustration 2, part number 34 Learn More
