Motor-delen
Alle onderdelen voor het repareren en reviseren van het motorblok, de aandrijving, in- en uitlaat.
-
€1.45Exhaust gasket for a Tomos, strengthened with a ring. Suitable for fast exhausts. Small hole (exhaust with thin corner) Learn More -
€95.00Tomos uitlaat. Model Lipnik racing.
28mm bocht.
Kleur: Zwart.
Let op: Bestel de verstelbare uitlaatsteun mee voor € 9,-
Tip: Vervang altijd de uitlaatpakking en tapeindjes + moertjes. Bevestigingspunten insmeren met hittebestendig kopervet. Dan krijg je ze later ook weer makkelijker los.
Let op: De bocht kan een beetje verkleuren door de warmte. Dit kun je beperken door een rijker brandstofmengsel af te stellen.
Learn More -
€8.00Inner silencer speedy / original Tomos exhaust. Learn More -
€2.85Demper vulling wol voor de Biturbo uitlaat Learn More -
€13.00Tecnigas sports exhaust Tomos A35, also available in chrome! Pay attention: Tomos mopeds built from 2007 onwards are equipped with an exhaust support on the frame with 2 mounting bolts. If this is the case, you need to order an exhaust support. Tip: Always replace the exhaust gasket and stud bolts + nuts. You should grease the attachment points with heat-resistant copper grease, so you can easily loosen them later. Learn More -
€3.25Gasket set for the Tomos a3 or a35 cylinder with small transfer ports. 50cc / 38mm. Consists of: - Head gasket - Foot gasket - Exhaust gasket Learn More -
€1.95Head gasket Tomos A35 for the 50cc (38mm) cylinder. A-Quality. Tip: Fasten the cylinder head steadily and cross-wise. Learn More -
€1.25Gasket for the original exhaust or the 25 km/h replacement exhaust. Suitable for all Tomos exhausts with a thin corner (small hole). When in doubt it is best to order a gasket with a big hole as well. Learn More -
€1.40Foot gasket for all Tomos models built after 2009 carrying large (wide) flush ports. Pay attention: there are 2 types of foot gaskets. When in doubt, always order a foot gasket from before 2009 as well. See illustration 2, part number 19. Learn More -
€1.00Membrane gasket Tomos A35. A-Quality. Tip: Order 2, one for in between the cylinder and the membrane and one for in between the membrane and the manifold. See illustration 2, part number 34 Learn More
